NOMAD (12v)
4,000kg (8,800 lbs)
OVERLAND

ELECTRICAL POWER

The 12v electrical power behind this winch is currently supplied by our mighty OX motor via your vehicle electrical system. For this 12v version of the NOMAD you will need a strong 12v DC supply from your vehicle. The Albright motor solenoid fitted inside the black control box is used to switch direction of the motor. These are all proven components and widely available and have been used extensively in the competition and motorsport industry by RED Winches for many years.

Pulling power of the winch can be variable due to the quality and capacity of the electrical winch system on your vehicle and the quality of the components used. Combine this with the scale of electrical losses or inefficiencies in the wiring systems.

We always test with two 85Ah batteries as a minimum, giving a 12V DC supply.

Power (+) and ground (-) connections using 50mm2 cable as a minimum.

DRUM CAPACITY & PULLING CAPACITY

The drum can hold 30m (90ft) of 11mm rope, which is the most common size for this winch. Other sizes and options are available, please see winch configuration options. PLEASE NOTE this winch is not suitable for use with steel wire rope.

Line pulling power with electric winches as you probably know depends heavily on the quality of your electrical setup on your vehicle.

We recommend a good 12v alternator (180A as a minimum) charging the winch batteries.
Two batteries of a minimum of 75Ah capacity each, giving you the 12v DC supply you need.
At least 50mm² high quality, high load electrical cable, 70mm² is recommended.
Clean electrical joints and if in areas prone to water joints should have conductive grease applied.

All our winches are now supplied with Plasma Locks to hold the rope onto the drum, proven and very reliable. They are a simple solution to ensure you always have the minimum amount of line wraps on your winch drum. With the Plasma Lock installed you can pull your line to your anchor point with confidence that it won’t leave you without any line on the drum and come off in your hand. The Plasma lock has been designed for a variety of line gauges and you can feel confident that at least 8-10 wraps remain on your drum, reducing greatly the chances of a slippage. Supplied free of charge with every winch:
https://www.red-winches.com/products/plasma-lock/184/

GEARBOX

The gearbox has been specifically designed for strength, power and ease of service. All gears are manufactured from 655-M13 nickel chromium molybdenum steel with excellent durability. The gearbox runs in grease not oil making it much easier to service in the field.

The gearbox main ring gear runs within a large plain bearing, giving the NOMAD winch a world class drum freespool operation.

SERVICEABILITY

The NOMAD has been designed with all off-roading in mind.

Ease of servicing was one of the top priorities at RED Winches.

OUR PROMISE

We are confident to stand behind our products in competition use. All RED Winch NOMADs are backed with a 2-year mechanical warranty. This covers all mechanical parts. Wearing parts, bearings, brake pads etc are excluded, as are electrical components, motors and solenoid packs

FOOD FOR THOUGHT WHEN WINCHING……

The length of cable you spool out also affects the power of the pull.

All electric winches are rated based on only one full wrap left on the drum or bottom layer as some call it.

The less line you reel out, the less power you’ll get.

For a maximum pull from your winching situation, unwind enough cable to leave only one layer on the drum. If your anchor point is too close to spool out enough rope, double the line with a Snatch Block or Snatch Ring.

Another trick to squeeze the most power out of your winch is to get the stuck vehicle rolling. A rolling load feeds and helps the momentum of the initial pull and eases the strain on your winch. Before starting the recovery, dig out around the tires or build a rock ramp to give the stuck vehicle some traction as it begins to move.

As your winch works harder, it generates more heat. In order to prevent overheating keep an eye on the temperature of the motor, take breaks if you’re pulling over a long distance and let the motor cool before starting again. Heat in the motor is generated from power being drawn from your batteries, the lower the voltage on your batteries the hotter the motor will get. DO NOT winch hard if your voltage is not at 12v or more. If it drops below 11v while winching then you need to stop winching and wait for your batteries to recover.

Winching places a heavy load on your electrical system, so keep your engine running to prevent a complete drain of your batteries. In some cases, a stock battery may not provide enough capacity to power a heavy winching at maximum pull. Some Off-road / 4×4 people swap the stock battery for a heavy duty one, or they install a second battery solely to help with the deep cycle winching puts on batteries and to help the capacity of the electrical system.

Your winch has incredible potential if you know how to get the most power out of it

OPERATION – SAFETY – IMPORTANT

This winch is part of a range of winches produced by RED Winches Ltd that are designed for high speed and high power. This winch will pull rope onto its drum quicker than most winches and with good power.

If operated without care and attention this winch could easily damage fingers, hands and in some cases eyesight.

The winch is powered by DC voltage. The current draw on this DC voltage can be high so care and attention must be taken when operating the winch that the electrical power to the motors is not exposed to the operator.
The winch should only be operated by a person who has been authorised to do so or has been trained and responsible to operate it safely.

WARNING!

THIS WINCH IS ONLY SUITABLE FOR WINCHING SITUATIONS / APPLICATIONS / USE

Ensure all fasteners and connections are adequately connected or secured before using the winch
Maintain the equipment in good condition (use an authorised servicing agent if required)
Replace or repair damaged parts.
Use genuine parts only. Unauthorised parts may be dangerous and will invalidate any warranty.
Use a qualified person to lubricate if required and maintain the equipment.
Before use, ensure all parts are clean and free of contamination / dirt.
DO NOT use solvent cleaners to clean this winch, clean soapy water only.

DO NOT use high pressure jets on the joints of this winch, wash with sponge only.

Use the equipment in a suitable work or operational area, keep winching controls clean and tidy and free from contaminating materials, and ensure that there is adequate lighting while setting and operating the winch.

Keep the winch and winch rope clean for best and safest performance.
DO NOT exceed the rated capacity of the winch, asses your recovery prior to doing it

When operating remove any ill-fitting clothing. Remove ties, watches, rings and other loose jewellery, and contain long hair.
Maintain correct balance and footing, do not overreach.

Ensure the floor / ground is not slippery and wear appropriate footwear.
Before using the winch check that there are no overhead or surrounding obstructions.
The speed during operation must be kept steady and constant.

DO NOT generate sudden movements or shock loads.
DO NOT use the winch for a task it is not designed to perform.

DO NOT use this winch as a lifting device, it is not a hoist.
DO NOT use the equipment if damaged.
DO NOT exceed the rated capacity of the equipment.
DO NOT use the equipment when you are tired or under the influence of alcohol, drugs or intoxicating medication.
DO NOT allow untrained persons to use the equipment unsupervised
DO NOT make any modifications to the equipment

DO NOT use this winch with steel wire rope

DO NOT operate the winch and handle the synthetic rope without approved
winching gloves and appropriate PSE